NEWS
SZWIT Your SMT/DIP Transmission Solution Center

SZWIT Your SMT/DIP Transmission Solution Center

Dedicated to innovation in SMT PCB Handling System, Empowering customers to reduce costs and increase efficiency

2025-10-22

Vietnam EIMS Expo Triumph | SZWIT

Vietnam EIMS Expo Triumph | SZWIT

Exhibition in Vietnam

2024-12-27

SMT Placement Calibration: Steps Before & During | SZWIT

SMT Placement Calibration: Steps Before & During | SZWIT

The calibration work of the SMT placement machine is divided into the calibration before placement and the calibration during the placement process. The calibration is to ensure the accuracy of the SMT placement. Below, Shenzhen Zhichi Technology shares the calibration steps before and during the placement of the SSMT placement machine.

2022-06-14

Should a Placement Machine Be Preheated? | SZWIT

Should a Placement Machine Be Preheated? | SZWIT

If the placement machine is shut down for a long time, the circuit temperature is low, and there may be air liquefaction in the circuit, so it needs to be powered on for a few minutes first, and when the circuit is unloaded, use its own temperature to return the circuit to the normal working state.

2022-06-14

Fixing Solder Paste Printer Offset | SZWIT

Fixing Solder Paste Printer Offset | SZWIT

Solder paste printing is the first important process of the SMT process. If the printing offset of the solder paste printer is not dealt with, it is likely to cause batch tin connection, which will affect the quality of the finished product.

2022-06-14

< 123 >