It is used for temporary storage of PCB or PCBA of NG after dual-rails SPI and AOI detection equipment.
Temporary Storage Machine
Used to alleviate the production speed problem of front and back end equipment, the front end equipment is too fast or the back-end equipment is abnormal, resulting in product PCBA or PCB accumulation, the temporary storage machine can automatically store the products produced by the front-end equipment.
Equipped at the start terminal of SMT line, designed for uploading the PCBs, sensors are provided to prevent platform movement until the PCB has been fully inserted into the magazine automatically
After the NG&OK board receiver is used for AOI, it automatically stores the NG&OK board separately by receiving the AOI signal.
PCB cleaning machine
1. Control system: PLC control, touch screen operation panel; 2. Frame material: sheet metal welding, off-white electrostatic spraying; 3. Standard signal: SMEMA standard 4-core signal line is used. 4. Dust-sticking roller method: It can easily remove the tiny contamination particles on the surface of the PCB to ensure the cleanliness of the board; 5. Anti-static device: to ensure the safety of the equipment in production;
Cooling Buffer Machine
It is used for cooling buffer after reflow oven. It is temporarily stored and sent out after air cooling according to the set time.
This unit is used to collect PCBs into magazine at the end of SMT production line
It is applicable to the full-automatic connection between adjacent equipment of SMT, DIP or assembly line, and has the functions of transmission and stop. When the production line needs passage, just start the access button, which is convenient and fast.
Equipped at the end terminal of SMT line, designed for unloading the PCBs, sensors are provided to prevent platform movement until the PCB has been fully inserted into the magazine automatically, dual controlling system, independent control system, reduce labor, double increase the productivity efficiency.
Automatic sucking loader
Equipped at the start terminal of SMT line, Two function modes of vacuum suction plate and feed plate are selected, and the feeding operation of double panel and light plate is satisfied at the same time.
Automatic PCB inverter
The automatic flipping machine is used for double-sided PCB flipping in SMT production line (or coating line), and the reverse operation is realized by turning the PCB 180 degrees.
Scan code to follow official account